Wooden table legs

For heavy-duty applications, prioritize Hardwoods such as Oak, Walnut, Maple, or Beech, as they offer superior load-bearing capacity and screw-holding strength. Ensure the wood is Kiln-Dried (KD) to a moisture content of 8%–12% to prevent warping, cracking, or splitting after assembly. For cost-sensitive projects, Rubberwood is a sustainable and durable alternative often used in B2B mass production.

Buyers must verify the Top Diameter/Width to ensure sufficient surface area for mounting plates. Check the Mounting Type, such as Pre-drilled holes, Hanger Bolts (typically 5/16" or M8/M10), or Cleat Systems. For height, standard dining table legs should be 28–30 inches (71–76 cm), while coffee table legs range from 16–18 inches. Always request a Load Capacity Rating per leg to ensure the set can support the intended tabletop weight.

Ensure all coatings (paints, lacquers, or oils) are Lead-Free and meet VOC (Volatile Organic Compounds) emission standards. For the US market, compliance with CARB Phase 2 or TSCA Title VI is mandatory if engineered wood components are used. For the EU, look for FSC (Forest Stewardship Council) certification to prove sustainable sourcing and REACH compliance for chemical safety in finishes.

Request samples to inspect for Sanding Smoothness (Grit 180-220 minimum) and the absence of visible knots, sapwood, or mineral streaks on A-grade surfaces. Check the Symmetry of turned legs using calipers; a variance of more than 1mm can indicate poor CNC calibration. For joined legs, verify that Mortise and Tenon joints or Finger joints are tight and flush.

A Phytosanitary Certificate is essential. It proves the wood has been treated (usually via Heat Treatment - HT) to eliminate pests. Without this, or the ISPM 15 stamp on wooden packaging, shipments may be quarantined or returned at the buyer's expense. Always confirm the supplier on Made-in-China.com can provide valid fumigation or heat treatment documentation.

Wood is hygroscopic and reacts to humidity changes in shipping containers. Require suppliers to use Silica Gel desiccant packs and Moisture-proof PE bags for individual leg packaging. Negotiate a Quality Guarantee Period of at least 6 months to cover defects like 'checking' or 'warping' that may only appear after the wood acclimates to the destination climate.

For custom shapes, expect a Tooling or Mold Fee for CNC programming. To lower the unit price, aim for an MOQ of 500–1,000 pieces. You can negotiate a Volume Rebate where the initial tooling fee is refunded once total orders exceed a certain threshold. Always use Trade Assurance or secure payment terms to protect your deposit until the Pre-Shipment Inspection (PSI) is passed.

Due to the weight and volume, Sea Freight (LCL or FCL) is the standard. For high-volume buyers, FOB (Free On Board) terms are recommended to maintain control over freight costs and choice of carrier. If you are a small retailer, DDP (Delivered Duty Paid) via specialized furniture logistics lines can simplify the process by including customs clearance and 'last-mile' delivery in the quote.