Generator 2500kw
10000+ products and 4000+ suppliers results
Factory 2500kw Mtu 4000 Series 20V4000g83s Synchronous Generator
2500kw 2.5MW 1500rpm 1800rpm Permanent Magnet Generator Drived by Motor/Engine
1500rpm Diesel Genset 2500kw Diesel Generators with Mtu Engine
3125kVA 2500kw Low Fuel Consumption Generator Set with Famous Cummins Engine
Soundproof Container Big Power Genset 3250kVA 2500kw Engine Diesel Generator
Hot Sale Silent Generator 10-2500kw Driven by Famous Brand Diesel Engine
2500kw High Voltage Diesel Generators Factory Industrial Gen Sets Lowest Price
V16 Cylinder Ultra High Power Diesel Generator 2500kw Prime 2750kw Backup for Airport Hospital Heavy Chemical Plant
2500kw Water Power Turbine Generator Stainless Steel Francis Runner
High Performance 500-2500kw Continuous Operation Gas Powered Generator for Data Center
Silent/Container Type 1000-2500kw Industrial Electric Diesel Generator with ATS System
2500kw 3125kVA Mining Dedicated Premium Engine Heavy Duty Industrial Standby Diesel Generator
1500kw 2000kw 2500kw 3000kw Heavy Duty Cummins Container Generator for Large Industrial Power Station
2000kw 2500kw 3000kw Three Phase Water Cooled Silent Diesel Generator
2500kw High Coolant Temperature Protection Industrial Power Generator for Remote Mining Camps
1250kw 2000kw 2500kw 3500kw Containerized Silent Diesel Generator Set for Large Scale Facilities
2500kw Silent Type Diesel Generator Set Power Supply
Industrial 2400kw 2500kw 2800kw 3000kw Yuchai Chinese Engine Diesel Generator for Data Center/Power Plants
Yuchai Silent Diesel Generator 2300kw 2400kw 2500kw 2800kVA 3000kVA 3200kVA Three Phase DC Plant Power Supply Genset of Yfs
2500kw Large Commercial Automatic Start & Stop Intelligent Control Diesel Generator
2500kw 3125kVA Water-Cooled Diesel Generator Low Fuel Consumption Rate Quick Start Yuchai Diesel Generator Set
Sourcing guidance for Generator 2500Kw
What are the key technical specifications to evaluate when sourcing a 2500Kw generator?
For a high-capacity 2500Kw (2.5MW) generator, you must prioritize the engine brand (e.g., Cummins, Perkins, or MTU) and the alternator efficiency (typically 95%+). Ensure the unit supports high-voltage outputs (6.3kV, 10.5kV, or 11kV) if intended for industrial grids. Key metrics include fuel consumption rates at 75% and 100% load, the cooling system capacity (radiator vs. heat exchanger), and the transient response capability to handle sudden load changes without frequency drops.
Which international compliance standards are mandatory for large-scale power equipment?
The equipment must adhere to ISO 8528 for reciprocating internal combustion engine-driven alternating current generating sets. For safety and quality assurance, verify CE marking (for EU), UL listing (for USA), and ISO 9001/14001 certifications. Additionally, ensure the engine meets local emission standards (such as EPA Tier 2/3/4 or EU Stage V) to avoid legal hurdles during installation and operation.
How should a buyer assess the structural and functional reliability of a 2.5MW unit?
Request a Factory Acceptance Test (FAT) report that includes a full-load test (100% and 110% overload) for at least 2-4 hours. Check for vibration isolation technology and the quality of the control system (e.g., Deep Sea or ComAp), which should offer remote monitoring and automatic synchronization capabilities for parallel operation with other units or the grid.
What are the typical usage scenarios and maintenance requirements for this power grade?
A 2500Kw generator is primarily used as prime power for mining operations, data centers, and large manufacturing plants, or as emergency standby power for hospitals and airports. Maintenance requires a strict schedule of oil and filter changes every 250-500 hours, annual load bank testing to prevent 'wet stacking,' and specialized coolant analysis to prevent cylinder liner pitting.
Cross-Border Procurement & Risk Management for Heavy Power Equipment
What are the primary risks when importing heavy industrial generators?
The main risks include logistical damage due to improper crating and non-compliance with local grid codes. Because these units weigh several tons, specialized heavy-lift shipping is required. Always use Made-in-China.com's Secured Trading services to ensure funds are only released after the third-party pre-shipment inspection (PSI) confirms the technical specs match your Purchase Order.
How can I negotiate effectively with large-scale power equipment suppliers?
Focus on the Total Cost of Ownership (TCO) rather than just the initial price. Negotiate for extended warranties (24-36 months), the inclusion of critical spare parts kits for 2,000 hours of operation, and on-site commissioning support. Mention that you are comparing quotes from verified manufacturers on Made-in-China.com to leverage competitive pricing.
What shipping and installation precautions should be taken for a 2500Kw unit?
Due to the size, these are often shipped as Breakbulk cargo or in Open Top containers. Ensure the supplier provides a detailed foundation drawing and wiring diagrams at least 30 days before arrival. You must arrange for heavy-duty cranes (50-100 ton capacity) at the destination port and site for offloading. Verify that the Incoterms (e.g., CIF or DDP) clearly define who is responsible for the high cost of inland heavy-haulage.
How do I ensure transaction security for high-value industrial orders?
Never transfer full payment upfront. Utilize a Letter of Credit (L/C) or a staged payment plan (30% deposit, 60% after successful FAT, 10% after installation). Conduct due diligence by checking the supplier's Audit Reports on Made-in-China.com to verify their factory scale, production capacity, and past export history for similar high-capacity units.





























