Wholesale bathroom glass

Bathroom glass must be tempered (toughened) to ensure safety. Buyers should verify compliance with ANSI Z97.1 (USA), EN 12150 (Europe), or AS/NZS 2208 (Australia/New Zealand). Ensure the glass features a permanent laser-etched safety logo in the corner, which is a prerequisite for customs clearance and building inspections in most developed markets.

For frameless shower doors, a thickness of 8mm to 12mm is standard to ensure structural integrity. For framed enclosures, 5mm to 6mm is sufficient. Consider Easy-Clean (Hydrophobic) coating to add value, as it reduces water stains and maintenance. Additionally, Low-Iron glass (Ultra-Clear) is recommended for high-end projects to eliminate the natural green tint of standard clear glass.

Glass is processed before tempering; it cannot be cut or drilled afterward. You must provide precise CAD drawings indicating hole positions for hinges and handles. Ensure the edge polishing is specified (typically Flat Polished Edge) and that corner treatments (e.g., R-shaped safety corners) are defined to prevent injury during installation.

Request a Fragmentation Test report where a 50x50mm area is broken; it should yield more than 40-50 small, blunt pieces to be considered safe. Ask the supplier if they use Heat Soak Testing (HST), which significantly reduces the risk of spontaneous glass breakage caused by nickel sulfide inclusions, a critical factor for high-rise or luxury developments.

Glass requires heavy-duty seaworthy plywood crates with IPPC fumigation marks. Ensure the supplier uses cork pads or corrugated paper as spacers between each sheet to prevent scratches. For LCL (Less than Container Load) shipments, insist on A-frame steel racks or reinforced wooden crates to prevent tilting during transit.

Focus on the yield rate and breakage compensation policy. Negotiate a 1-3% spare parts/glass allowance for large bulk orders to cover potential transit damage. Always request a factory audit or video inspection via Made-in-China.com's audited supplier services to confirm the manufacturer has in-house tempering furnaces rather than outsourcing the process.

Use Secured Trading Services provided by Made-in-China.com to ensure payment is only released upon proof of shipment. For the first order, utilize a 30% deposit and 70% balance against the Bill of Lading (B/L) copy. Hiring a third-party inspector (like SGS or Intertek) to perform a pre-shipment inspection is highly recommended to check for bubbles, scratches, and dimensional accuracy.

Check your local customs regulations for Anti-Dumping Duties (ADD) on Chinese glass, which can be high in certain regions like the EU or USA for specific glass types. Ensure the supplier provides a Certificate of Origin (CO) and accurate HS Codes (typically 7007.19) to facilitate smooth customs entry and potentially leverage Free Trade Agreements (FTAs).